Cutting Table for Upholstery

Over the centuries, the techniques of upholstery take an ever- more complicated measures. Upholstery is the work of providing padding, webbing, fabric or leather covers to furniture, especially seats or chairs. Though creativity is the foremost thing required to do this kind of work, cutting table is the most important tool or device which is required for upholstery. 

For any seam- stresses workshop or any upholstery shop, cutting table is one of the essential tools used for various tasks besides just cutting the fabric or leather being used. As the cutting table for upholstery is very specific in its design and working, and it’s not easy at all to find the right one with the right size, most of the upholsterers prefer to build their own tables. 

But if you are going to buy a cutting table for upholstery, there are few things you should consider. Let’s have a look at them:

• Fabric Catch: A fabric catch is available on every side of a good cutting table. In this way, you will be allowed to roll the material from the jolt without the jolt moving onto the floor. This feature will also help you with fabric measurement to cut down the required fabric or other material for upholstery. In case, bolt slides off the cutting table, it will pull the fabric down with it and cause the measurements to be altered. 

• Height of Table: If you are going to buy a customizable table, then go for it, and in case this option is not available, you will need to ensure that you have a table that is adjustable for you to twist closer for a few hours. Remember, if it’s too high, it will cause exhaustion in your shoulders and arms. On the other hand, if it’s too short, it is going to bring backaches. A definitive height will be 1 inch beneath your elbow when your arm is resting next to you. 

 

• Cushioning or Padding: Padding is another feature you should look. Padding on the table top itself won’t help you a lot, yet the side padding will assist your comfort levels when you have to incline up against the table for extensive times.

 

Enhance Production Efficiency with Roller Blinds Table

Imagine you don’t need any other device for roller blind production except that one machine – Roller cutter machine. Yes, it is possible with roller cutter machine which is not just a cutting table used for fabric, but it is a device which also support each phase of the production process of roller blinds. 

It is the one device for the whole production for upholstery. REXEL is one of the leading manufacturers of roller cutting machine, specialized in creating the perfect table for cutting blinds for windows. The table is made of high- quality steel profiles with powder coating, providing the protection from corrosion for a very long time. In order to get impressive tabletop durability, the edges of the tabletop are protected with the white powder coated aluminum angles. If you want to inspect blinds fabric before cutting, illumination zone is an additional option given at the tabletop. Below are some of the attractive features of Roller Blinds Table:

• You can perform the cutting process from two ends or directions and the standard widths are 4000 mm, 3100 mm, 3400 mm.
• Control panels are given with durable buttons.
• You can control the quality of production from the beginning to the end with the given tabletop illumination zone for fabric inspection. 
• The table machine is completely made up of European materials. 
• The speed of round table is 4200 rpm with the head moving speed of 0.9 m/s along the guide. 
• The machine has overall power of 700 W with Voltage 230 V/1 phase/ 50 Hz.
• To protect the cutter cables, energy chain is present along with a round table sharpening device. 
• The machine has pneumatic clamping line with improved manual positioned for 90- degree angle set.

In addition, with the presence of high- speed electrical motor that helps to achieve accurate fabric cut, one can easily enhance the efficiency of the whole production with this brand new roller blinds table by REXEL.